Custom gates, iron fencing & welding in the San Fernando Valley

Designed, fabricated and installed by one crew, from the foothills of Sylmar to the hillsides above Ventura Boulevard. Pick your neighborhood below, or call and tell us what you need.

Custom steel driveway gate built by DC Iron & Metal Designs

Central Valley

Apartments, storefronts and family homes around the Van Nuys Civic Center and the Sepulveda Basin: pedestrian gates, railings and security iron.

Why Valley metalwork is built differently

Heat. The Valley is the hottest part of Los Angeles. Woodland Hills set the county's all-time high of 121°F at Pierce College in September 2020. Dark steel in full sun gets hot enough to burn, finishes fade fast, and gate operators work harder. We spec powder coat colors, operator sizes and hinge hardware with that in mind.

Wind and fire. Santa Ana winds come through the north end of the Valley, and parts of hillside neighborhoods like Sylmar, Granada Hills, Encino and Woodland Hills are in Very High Fire Hazard Severity Zones. A solid gate leaf catches wind like a sail, so posts and hinges get sized up. Steel and iron don't burn, so they suit fire-zone fencing.

Old steel, new standards. The 1994 Northridge earthquake exposed brittle welded-steel connections across the region and changed how structural welds are designed and inspected. For anything load-bearing, from stair stringers to support posts, we design and weld for the load it carries. See our welding work.

Design review. HOAs in gated enclaves, and historic districts like the Balboa Highlands Eichler tract in Granada Hills, can review what faces the street. Permits in the City of Los Angeles run through LADBS. We draw the gate before we build it so you have something to submit.

San Fernando Valley gates & fencing: common questions

Still have a question? Call (818) 477-7352.

Do you repair wrought iron gates and fences anywhere in the San Fernando Valley?

Yes. We repair and re-weld wrought iron gates, fences and railings across the Valley, from Sylmar and Granada Hills down to Sherman Oaks and Encino. Most repairs are done on site: re-hanging sagging gates, replacing hinges and posts, cutting out rust and welding in new steel. Call (818) 477-7352 with a photo and we can usually tell you on the phone whether it is a repair or a replacement.

How much does a custom driveway gate cost in the San Fernando Valley?

It depends on the opening width, swing or slide, steel or aluminum, the design, and whether it is automated. A hillside driveway that needs a sliding gate or new posts costs more than a flat swing gate on existing columns. We measure on site for free and give you a written quote before anything is built.

Do I need a permit for a new fence or gate in the Valley?

Most of the Valley is inside the City of Los Angeles, where fences, walls and gates follow the zoning code and the Department of Building and Safety (LADBS) issues permits. Front-yard heights are limited, and taller fences or walls can need a permit or zoning approval. Burbank and the City of San Fernando are separate cities with their own rules. We check the requirements for your address before we design.

Can you automate the gate I already have?

Usually. If the gate frame and posts are sound we can add a swing or slide operator, safety sensors and remotes or a keypad. If the gate is too heavy, warped or poorly hung, we fix that first so the opener does not burn out, which matters in the West Valley heat.

Do you do commercial security fencing and gates?

Yes. We build perimeter fencing, sliding and swing gates and railings for yards, warehouses, apartment buildings and storefronts, including the industrial corridors in Sun Valley and Van Nuys.

What Valley clients say

Read our reviews on Google
  • ★★★★★

    “David with DC Iron has done a phenomenal job for us. We asked them to design and install iron window bars for security and they not only look great, but the quality shows the craftsmanship of DC Iron.”

    Julie G.Google Review
  • ★★★★★

    “David was very nice and professional when communicating with me over the phone. His work was excellent, and his price was fair. He installed the new gate within three days as promised.”

    Tewodros T.Google Review
  • ★★★★★

    “I would highly recommend DC Iron works for any gates or railing needs!!”

    Evan J.Google Review
  • ★★★★★

    “I recently had DC Iron Works build a driveway gate and do my fence, and I have to say they did an amazing job. I am very satisfied with the end result and would highly recommend their services to anyone looking.”

    Kath N.Google Review

Free estimate anywhere in the Valley

Tell us your neighborhood and what you need. We'll get back to you within one business day to set up a free on-site measure.

Rather talk it through?(818) 477-7352